Hey Tim, below is a breakdown of all the parts. I’ve added another piece which was missing in the earlier picture – the hub that interfaces with the cube. Basically, the original cube drive gear mounts inside a set screw hub, that hub bolts to another hub that mounts the 5mm drive shaft for the extruder gear. The red part is the extruder assembly and the brown parts are bearings. I use Autodesk Inventor for CAD – I could send you step files if you’re interested.
Still scratching my head on what to do about the slicer, as the programming portion is a bit over my head.
- This reply was modified 2 months, 2 weeks ago by No Bull.